You're currently on:
Creda AquaWave II Electric Shower
The all-white unit with a white and chrome accessory set is easy on the eye and easy to use. With an on/off push button and dials to control power and temperature selection it couldn’t be simpler.
The Aquawave II also features ‘set and forget’, a handy function that allows the power and flow rate settings to remain set ready for your next shower, eliminating the need for constant adjustment. When in operation set and forget is indicated by a stylish neon light.
When it comes to power the Aquawave II has it all, with three settings; cold, economy and high it is perfect whatever the weather. In addition it features a 3 mode rub clean handset to prevent scaling in hard water areas, plus a fully adjustable slider bar kit and soap dish.
- Available in 8.5kW, 9.5kW & 10.5kW outputs
- Colour: All white with silver around the controls
- Temperature stabilised
- Phased shutdown (only on 10.5kW version)
- Seperate push button for on/off
- Seperate temperature and flow controls
- 3 power settings (high/medium/low)
- Cable and water entries: Left or right - top, bottom or rear
- 3 spray mode, rub clean shower head
- White and chrome accessory kit
- BEAB approved
- Dimensions: H = 364mm, W = 230mm, D = 93.5mm
- Power Rating (KW) 8.5kW, 9.5kW 7 10.5kW
- Recommended Cable Size 8.5kW & 9.5kW = 6 - 10mm2. 10.5kW = 10 - 16mm2
- Recommended Fuse Rating 8.5kW = 40amp. 9.5kW = 45amp. 10.5kW = 50amp
-
Manual Temperature Control
-
Temperature Stabilised
-
Phased Shutdown
-
Separate Flow And Temperature Control
-
Start/Stop Push Button
-
Rotary Power Controls
-
Rotary Temperature Controls
-
Power On Indicator
- Number of Power Settings 3
- Number of Different Spray Settings on Shower Head 3
-
White Finish
-
All White And Chrome Accessories
-
All Chrome Accessories
-
Suitable for Mains Pressure Water Systems
- Cable And Water Entries Multi-entry: Top, bottom or rear - left & right
-
CE Marked
-
BEAB Approved
- Height (mm) 364
- Width (mm) 230
- Depth (mm) 94
